MG Relay Cross Reference

Schneider RXM Equivalent — MG Zelio Relay Cross Reference

Sourcing a Schneider RXM equivalent for the Zelio range? Compare MG plug-in relay options for the RXM footprint and socket formats, including the RXM2AB2BD, RXM4AB2BD and RXM2AB2P7 cross references below.

Same pin layout      Socket compatible      Factory-direct supply      Same-day comparison available

QUICK SELECTION

Schneider RXM to MG Cross-Reference Table

Match the Schneider part number, contact arrangement and coil voltage to the corresponding MG option, then verify the different contact ratings and socket details.

Schneider partMG equivalentPolesContact ratingCoil
RXM2AB2BDBMY5-2C-10-D242 COMG 10A / RXM 12A at 250VAC24VDC
RXM4AB2BDBMY5-4C-D244 COMG 5A / RXM 6A at 250VAC24VDC
RXM2AB2P7BMY5-2C-10-A2302 COMG 10A / RXM 12A at 250VAC230VAC

The MG contact ratings are lower than the referenced RXM ratings. Confirm load current, contact configuration, coil voltage, pinout and socket compatibility before ordering.

SIDE-BY-SIDE DATA

Full Specification Comparison — Schneider RXM vs MG Equivalent

A transparent side-by-side comparison for engineering, maintenance and purchasing review.

SpecificationSchneider RXMMG equivalent
Contact configuration2 CO / 4 CODPDT (2 CO); 4 CO also available (BMY5-4C)
Contact rating12A (2 CO) / 6A (4 CO) at 250VAC10A (2C) / 5A (4C) at 250VAC — lower than RXM
Contact materialAgNiAgNi alloy
Coil voltages6–240VDC / 24–240VAC6–110VDC / 6–240VAC
Pinout / socket8 or 14-pin, RXZE socket8-pin (PYF08A) / 14-pin (PYF14A) — cross-referenced to RXZE base
Mechanical life10–30 million operations10 million operations
Schneider Electric, Zelio and RXM designations are trademarks of Schneider Electric. Part numbers are shown for cross-reference and identification only. MG is not affiliated with or endorsed by Schneider Electric. Cross-reference does not guarantee suitability: confirm ratings, dimensions, pin layout, socket fit, coil voltage and application requirements before ordering.

Need a Line-by-Line Relay Comparison?

Send us the three Schneider part numbers you reorder most. We will return a line-by-line comparison and factory-direct quotation—usually the same day.

BUYER QUESTIONS

Frequently Asked Questions

The BMY5 uses standard 8-pin (PYF08A) and 14-pin (PYF14A) layouts and is cross-referenced to the Zelio RXM range. Confirm the RXZE pinout and physical fit for your specific part before ordering.
Yes. The BMY5-4C is the 4-pole (4 CO) version. Note that the MG 4-pole model is rated 5A, compared with 6A for the referenced RXM4.
The minimum order is 200 units. Typical production lead time is approximately one month, subject to coil voltage, quantity and current production schedule.
Scroll to Top