MG Relay Cross Reference
Omron LY2N Equivalent — MG Relay Cross Reference
Looking for an Omron LY2N equivalent power relay? The MG replacement matches the LY footprint and PTF08A socket. Compare the LY2N, LY4N and LY2N 24VDC cross references below—with factory-direct supply.
✓ Same pin layout ✓ Socket compatible ✓ Factory-direct supply ✓ Same-day comparison available
QUICK SELECTION
Omron to MG Cross-Reference Table
Use the Omron part number and coil voltage on your existing relay to identify the closest MG replacement.
| Omron part | MG equivalent | Poles | Contact rating | Coil options |
|---|---|---|---|---|
| LY2N | BLY5-2C | DPDT | 10A 250VAC | 6–110VDC / 6–240VAC |
| LY4N | BLY5-4C | 4PDT | 10A 250VAC | 6–110VDC / 6–240VAC |
| LY2N 24VDC | BLY5-2C-D24 | DPDT | 10A 250VAC | 24VDC |
Always confirm the contact arrangement, coil voltage and socket designation before ordering.
SIDE-BY-SIDE DATA
Full Specification Comparison — Omron LY2N vs MG Equivalent
A practical comparison for engineering, maintenance and purchasing review.
| Specification | Omron LY2N | MG equivalent |
|---|---|---|
| Contact configuration | DPDT (2 Form C) | DPDT (2 Form C); 1C / 3C / 4C also available |
| Contact rating | 10A 250VAC | 10A 250VAC (up to 20A on higher-current variants) |
| Contact material | Ag alloy | AgNi alloy (AgSnO₂ on 12–20A) |
| Coil voltages | 6–220VDC / 6–240VAC | 6–110VDC / 6–240VAC |
| Pinout / socket | 8-pin, PTF08A socket | 8-pin, PTF08A-compatible socket |
| Mechanical life | 50 million operations | 10 million operations |
Omron and LY2N are trademarks or product designations of their respective owner. MG Relay is not affiliated with Omron. Cross-reference information is provided for product comparison; final suitability must be confirmed for the application.
Need a Line-by-Line Relay Comparison?
Send us the three Omron part numbers you reorder most. We will return an equivalent selection and factory-direct quotation—usually the same day.
BUYER QUESTIONS
Frequently Asked Questions
Yes. The BLY5-2C matches the LY footprint and plugs into the standard PTF08A socket, so no rewiring is normally required. Confirm the coil voltage before ordering.
Yes. The BLY5-4C is the 4-pole (4PDT) version.
The minimum order is 200 units. Typical production lead time is approximately one month, subject to coil voltage, quantity and current production schedule.